 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENA0894 Monolithic Linear IC LA42201 Overview Audio Output for TV application BTL 20W Monaural Power Amplifier The LA42201 is a 20W monaural power amplifier IC and optimal for use as the audio output power amplifier in TV application. Functions * 20W Monaural (VCC = 13V, RL = 4, THD = 10%) * Built-in mute function. * Built-in various protection circuit (short to power/short to ground/load shorting/thermal/overvoltage protection). Specifications Maximum Ratings at Ta = 25C Parameter Maximum supply voltage Allowable power dissipation Maximum junction temperature Thermal resistance Operating temperature Storage temperature Symbol VCC max Pd max Tj max jc Topr Tstg No signal Infinitely large heat sink Conditions Ratings 21 25 150 3 -25 to +75 -40 to +150 Unit V W C C/W C C Operating Conditions at Ta = 25C Parameter Recommended supply voltage Recommended load resistance Allowable operating supply voltage range Symbol VCC RL VCC op Conditions Ratings 13 4 8 to 16 Unit V V Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. 82207 MS PC 20060303-S00003 No.A0894-1/6 LA42201 Electrical Characteristics at Ta = 25C, VCC = 13V, RL = 4, f = 1kHz, Rg = 600 Parameter Quiescent current Output power Total harmonic distortion Voltage gain Output noise voltage Ripple rejection ratio Mute attenuation value Mute control voltage (pin 6) Symbol ICCO PO THD VG VNO SVRR ATT VMUTE-H VMUTE-L Input resistance Ri Rg = 0 THD = 10% PO = 1W VO = 0dBm Rg = 0, BPF = 20Hz to 20kHz Rg = 0, fR = 100Hz, VCCR = 0dBm VO = 1Vrms, BPF = 20Hz to 20kHz Mute OFF Mute ON 30 70 2.5 0 35 50 28 Conditions min 30 17 Ratings typ 50 20 0.06 30 0.2 40 80 5.0 1.0 65 0.3 32 0.4 max 100 mA W % dB mVrms dB dB V V k Unit Package Dimensions unit : mm (typ) 3286 30.0 Pd max - Ta Infinitely large heat sink Clamping torque : 39N.cm Silicone grease application 25.0 2.7 3.6 10.4 max 10.0 4.5 1.3 Allowable power dissipation, Pd max - W 25.0 20.0 15.0 5C/W heat sink 15.0 15.6 14.5 17.0 21.5 22.3 8.8 10.0 10C/W heat sink 9.6 20C/W heat sink 5.4 9.4 5.8 3.3 0.7 5.0 1.27 0.6 0.45 8.23 3.15 0 - 20 0 20 40 60 80 100 120 Ambient temperature, Ta - C SANYO : 220-7H No.A0894-2/6 LA42201 Block Diagram Ripple 5 Filter VCC/ground shorting protection circuit Load shorting protection circuit Thermal protection circuit over voltage protection circuit 4 GND 3 MUTE 6 Output amplifier IN 7 Ri= 50k 1 Input amplifier 2 +OUT VCC -OUT Test Circuit LA42201 Ripple Filter 5 + CRF 100F /16V RMute 10k -OUT1 1 VCC 2 +OUT1 3 GND 4 Mute 6 CMute 1F + /10V IN 7 + CVCC 1000F /25V CIN 0.47F VMute RL = 4 Description of external parts CIN CRF CMute CVCC : Input coupling capacitor, for which 0.47F is recommended. Since the input pin potential is about 1/2 VCC, the ceramic capacitor with small leak current is recommended. : Ripple filter capacitor, for which 100F is recommended. Note that the capacitance below 100F will cause decrease in the ripple removal ratio. : Capacitor for mute. : Power capacitor. No.A0894-3/6 LA42201 Cautions Oscillation of the capacitor between the output pin and GND may cause oscillation. In such an event, insert 0.1F +2.2 between pins 1 and 3. 1. Rise and fall of AMP VCC (2Pin), Mute (6Pin) 2 Pin VCC 1/3 Pin OUT 6 Pin Mute Mute 1s Mute 1s * When raising AMP, always raise the Mute pin 6 in 1sec after the VCC pin 2. * When falling AMP, always fall the VCC pin 2 in 1sec after the Mute pin 6. Above procedure will alleviate the shock sound at rise and fall. 2. Mute function (pin 6) The mute function is turned ON with the pin 6 voltage of 1.0V or less and OFF with the voltage of 2.5V or more. The inrush current to pin 6 is about 50A when VMute is 5V and RMute is10k. VMute RMute 200 6 + CMute 100k 50A GND Cautions for use 1. Short-circuit (power - output short-circuit), ground fault (GND - output short-circuit), and load short-circuit protective circuits are incorporated. They are activated in case of abnormal connection. These circuits remain active while such abnormal connection continues and is reset automatically when the abnormality is removed. 2. The thermal protection circuit is incorporated and is activated when the junction temperature (Tj) rises to about 170C or more. The output is controlled to return gradually to the attenuated state. 3. When the product is used near the maximum rating, even the slightest change in the condition may cause exceeding of the maximum rating, resulting possibly in breakdown. Take the sufficient margin for the supply voltage, etc. and always use the product within a range never exceeding the maximum rating. No.A0894-4/6 LA42201 120 ICCO/VN - VCC ICCO : RL = open VN : RL = 4 Rg = 0 VN 12 35 PO - VCC THD = 10% RL = 4 Rg = 600 f = 1kHz Quiescent current, ICCO - mA 100 10 30 Output power, PO - W 25 80 8 VN - V 20 60 I CCO 6 15 40 4 10 20 2 5 0 8 0 0 2 4 6 8 10 12 14 16 18 20 0 22 9 10 11 12 13 14 15 16 Supply voltage, VCC - V 10 7 5 3 2 1 7 5 3 2 0.1 7 5 3 2 0.01 0.1 2 3 5 71 2 3 THD - PO Supply voltage, VCC - V 10 7 5 3 2 1 7 5 3 2 0.1 7 5 3 2 0.01 23 5 7 100 23 5 7 1k 23 5 7 10k 23 57 100k THD - f Total harmonic distortion, THD - % 10kHz 1kHz 100Hz 5 7 10 2 3 5 7 100 Total harmonic distortion, THD - % VCC = 13V RL = 4 Rg = 600 VCC = 13V RL = 4 Rg = 600 PO = 1W 10 Output power, PO - W 0.2 0 - 0.2 - 0.4 Frequency, f - Hz 0.4 Response - f VNO - Rg VCC = 13V RL = 4 BPF = 20Hz to 20kHz Output noise voltage, VNO - mVrms 23 5 7 10k 23 5 7100k 0.3 Response - dB - 0.6 - 0.8 -1 - 1.2 - 1.4 - 1.6 - 1.8 -2 10 0.2 0.1 VCC = 13V RL = 4 Rg = 600 VO = 0dBm (f = 1kHz) 23 5 7 100 23 5 7 1k 0 10 23 Frequency, f - Hz 0 Resistance for signal generation, Rg - 5 7 100 23 5 7 1k 23 5 7 10k 23 57 100k SVRR - VCC Ripple rejection ratio, SVRR - dB Ripple rejection ratio, SVRR - dB - 10 RL = 4 Rg = 0 fr = 100Hz VCCR = 0dBm CVCC (CVCC) = 1F 0 SVRR - fr VCC = 13V RL = 4 Rg = 0 VCCR = 0dBm CVCC (CVCC) = 1F - 10 - 20 - 20 - 30 - 30 - 40 - 40 - 50 8 10 12 14 16 - 50 10 23 5 7 100 23 5 7 1k 23 5 7 10k 23 57 100k Supply voltage, VCC - V Ripple frequency, fr - Hz No.A0894-5/6 LA42201 0 SVRR - VCCR Mute attenuation value, Mute ATT - dB Ripple rejection ratio, SVRR - dB - 10 VCC = 13V RL = 4 Rg = 0 fr = 100Hz CVCC (CVCC) = 1F SVRR = 20log (VO/VCCR) 10 0 - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 - 90 1.0 1.3 ATT - Mute Pin - 20 - 30 - 40 - 50 0 0.5 1 1.5 2 VCC = 13V f = 1kHz RL = 4 Rg = 600 VO = 1Vrms (VMUTE = 5V) BPF =20Hz to 20kHz 1.6 1.9 2.2 2.5 RVCCR - V 20 Mute pin - V Pd - PO Allowable power dissipation, Pd - W 18 16 14 12 10 8 6 4 2 VCC = 13V RL = 4 Rg = 600 f = 1kHz Pd = VCCxICCO-PO 0 0.1 2 3 57 1 2 3 5 7 10 2 3 5 7 100 Output power, PO - W SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2007. Specifications and information herein are subject to change without notice. PS No.A0894-6/6 |
Price & Availability of LA42201
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |